ReP USP - Resultado da busca

Trabalho de evento
Diamond tool wear analysis during machining of microstructure surface for microinjection molding (2013)
Jasinevicius, Renato Goulart; Granado, Renê Mendes; Cirino, Giuseppe Antonio
Source: Proceedings of COBEM. Conference titles: International Congress of Mechanical Engineering - COBEM. Unidade: EESC
Subjects: DIAMANTE, FERRAMENTAS, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
JASINEVICIUS, Renato Goulart e GRANADO, Renê Mendes e CIRINO, Giuseppe Antonio. Diamond tool wear analysis during machining of microstructure surface for microinjection molding. 2013, Anais.. Rio de Janeiro, RJ: ABCM, 2013. . Acesso em: 16 maio 2024.
APA
Jasinevicius, R. G., Granado, R. M., & Cirino, G. A. (2013). Diamond tool wear analysis during machining of microstructure surface for microinjection molding. In Proceedings of COBEM. Rio de Janeiro, RJ: ABCM.
NLM
Jasinevicius RG, Granado RM, Cirino GA. Diamond tool wear analysis during machining of microstructure surface for microinjection molding. Proceedings of COBEM. 2013 ;[citado 2024 maio 16 ]
Vancouver
Jasinevicius RG, Granado RM, Cirino GA. Diamond tool wear analysis during machining of microstructure surface for microinjection molding. Proceedings of COBEM. 2013 ;[citado 2024 maio 16 ]
Trabalho de evento
Design and construction of a novel assisted tool-holder (2013)
Javarez Junior, Laercio; Duduch, Jaime Gilberto; Gonçalves, Andre Motta; Otoboni, José Antônio
Source: Proceedings of COBEM. Conference titles: International Congress of Mechanical Engineering - COBEM. Unidade: EESC
Subjects: PIEZOELETRICIDADE, SISTEMAS DE CONTROLE, FERRAMENTAS, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
JAVAREZ JUNIOR, Laercio et al. Design and construction of a novel assisted tool-holder. 2013, Anais.. Rio de Janeiro, RJ: ABCM, 2013. Disponível em: http://www.abcm.org.br/anais/cobem/2013/_PDF/262.pdf. Acesso em: 16 maio 2024.
APA
Javarez Junior, L., Duduch, J. G., Gonçalves, A. M., & Otoboni, J. A. (2013). Design and construction of a novel assisted tool-holder. In Proceedings of COBEM. Rio de Janeiro, RJ: ABCM. Recuperado de http://www.abcm.org.br/anais/cobem/2013/_PDF/262.pdf
NLM
Javarez Junior L, Duduch JG, Gonçalves AM, Otoboni JA. Design and construction of a novel assisted tool-holder [Internet]. Proceedings of COBEM. 2013 ;[citado 2024 maio 16 ] Available from: http://www.abcm.org.br/anais/cobem/2013/_PDF/262.pdf
Vancouver
Javarez Junior L, Duduch JG, Gonçalves AM, Otoboni JA. Design and construction of a novel assisted tool-holder [Internet]. Proceedings of COBEM. 2013 ;[citado 2024 maio 16 ] Available from: http://www.abcm.org.br/anais/cobem/2013/_PDF/262.pdf
Trabalho de evento
Kinematic constitutive modeling of an aluminum alloy under cyclic fatigue (2013)
Lima, Rodrigo Mendes; Massaroppi Júnior, Ernesto
Source: Proceedings of COBEM. Conference titles: International Congress of Mechanical Engineering - COBEM. Unidade: EESC
Subjects: CINEMÁTICA, FADIGA DOS MATERIAIS, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
LIMA, Rodrigo Mendes e MASSAROPPI JÚNIOR, Ernesto. Kinematic constitutive modeling of an aluminum alloy under cyclic fatigue. 2013, Anais.. Rio de Janeiro, RJ: ABCM, 2013. Disponível em: http://www.abcm.org.br/anais/cobem/2013/PDF/2506.pdf. Acesso em: 16 maio 2024.
APA
Lima, R. M., & Massaroppi Júnior, E. (2013). Kinematic constitutive modeling of an aluminum alloy under cyclic fatigue. In Proceedings of COBEM. Rio de Janeiro, RJ: ABCM. Recuperado de http://www.abcm.org.br/anais/cobem/2013/PDF/2506.pdf
NLM
Lima RM, Massaroppi Júnior E. Kinematic constitutive modeling of an aluminum alloy under cyclic fatigue [Internet]. Proceedings of COBEM. 2013 ;[citado 2024 maio 16 ] Available from: http://www.abcm.org.br/anais/cobem/2013/PDF/2506.pdf
Vancouver
Lima RM, Massaroppi Júnior E. Kinematic constitutive modeling of an aluminum alloy under cyclic fatigue [Internet]. Proceedings of COBEM. 2013 ;[citado 2024 maio 16 ] Available from: http://www.abcm.org.br/anais/cobem/2013/PDF/2506.pdf
Trabalho de evento
Total productive maintenance methodology as a tool to develop people in a manufacture area (2013)
Souza, Murilo Fonseca; Silva, Iris Bento da
Source: Proceedings of COBEM. Conference titles: International Congress of Mechanical Engineering - COBEM. Unidade: EESC
Subjects: PRODUTIVIDADE, MANUFATURA, MANUTENÇÃO PRODUTIVA TOTAL
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SOUZA, Murilo Fonseca e SILVA, Iris Bento da. Total productive maintenance methodology as a tool to develop people in a manufacture area. 2013, Anais.. Rio de Janeiro, RJ: ABCM, 2013. . Acesso em: 16 maio 2024.
APA
Souza, M. F., & Silva, I. B. da. (2013). Total productive maintenance methodology as a tool to develop people in a manufacture area. In Proceedings of COBEM. Rio de Janeiro, RJ: ABCM.
NLM
Souza MF, Silva IB da. Total productive maintenance methodology as a tool to develop people in a manufacture area. Proceedings of COBEM. 2013 ;[citado 2024 maio 16 ]
Vancouver
Souza MF, Silva IB da. Total productive maintenance methodology as a tool to develop people in a manufacture area. Proceedings of COBEM. 2013 ;[citado 2024 maio 16 ]
Trabalho de evento
Measurement of rotor vibration through photographic images (2013)
Endo, Marcos Tan; Montagnoli, Arlindo Neto ; Nicoletti, Rodrigo
Source: Proceedings of COBEM. Conference titles: International Congress of Mechanical Engineering - COBEM. Unidade: EESC
Subjects: ROTOR, FOTOGRAMETRIA, PROCESSAMENTO DIGITAL DE IMAGENS, VIBRAÇÕES, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ENDO, Marcos Tan e MONTAGNOLI, Arlindo Neto e NICOLETTI, Rodrigo. Measurement of rotor vibration through photographic images. 2013, Anais.. Rio de Janeiro, RJ: ABCM, 2013. Disponível em: https://repositorio.usp.br/directbitstream/7185268e-2302-4cc0-98f7-136e70907af0/OK___trabalho%2021%20-%20Measurement%20of%20Rotor%20Vibration%20Through%20Photographic%20Images%20%28COBEM%202013%29.pdf. Acesso em: 16 maio 2024.
APA
Endo, M. T., Montagnoli, A. N., & Nicoletti, R. (2013). Measurement of rotor vibration through photographic images. In Proceedings of COBEM. Rio de Janeiro, RJ: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/7185268e-2302-4cc0-98f7-136e70907af0/OK___trabalho%2021%20-%20Measurement%20of%20Rotor%20Vibration%20Through%20Photographic%20Images%20%28COBEM%202013%29.pdf
NLM
Endo MT, Montagnoli AN, Nicoletti R. Measurement of rotor vibration through photographic images [Internet]. Proceedings of COBEM. 2013 ;[citado 2024 maio 16 ] Available from: https://repositorio.usp.br/directbitstream/7185268e-2302-4cc0-98f7-136e70907af0/OK___trabalho%2021%20-%20Measurement%20of%20Rotor%20Vibration%20Through%20Photographic%20Images%20%28COBEM%202013%29.pdf
Vancouver
Endo MT, Montagnoli AN, Nicoletti R. Measurement of rotor vibration through photographic images [Internet]. Proceedings of COBEM. 2013 ;[citado 2024 maio 16 ] Available from: https://repositorio.usp.br/directbitstream/7185268e-2302-4cc0-98f7-136e70907af0/OK___trabalho%2021%20-%20Measurement%20of%20Rotor%20Vibration%20Through%20Photographic%20Images%20%28COBEM%202013%29.pdf
Trabalho de evento
Influence of roughness in protective strips of leading edge for generating wind (2013)
Sotto Mayor, Gabriel; Moreira, Alysson Bruno Barbosa; Cerón Muñoz, Hernán Darío
Source: Proceedings of COBEM. Conference titles: International Congress of Mechanical Engineering - COBEM. Unidade: EESC
Subjects: AEROFÓLIOS, ENERGIA EÓLICA, ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SOTTO MAYOR, Gabriel e MOREIRA, Alysson Bruno Barbosa e CERÓN MUÑOZ, Hernán Darío. Influence of roughness in protective strips of leading edge for generating wind. 2013, Anais.. Rio de Janeiro, RJ: ABCM, 2013. . Acesso em: 16 maio 2024.
APA
Sotto Mayor, G., Moreira, A. B. B., & Cerón Muñoz, H. D. (2013). Influence of roughness in protective strips of leading edge for generating wind. In Proceedings of COBEM. Rio de Janeiro, RJ: ABCM.
NLM
Sotto Mayor G, Moreira ABB, Cerón Muñoz HD. Influence of roughness in protective strips of leading edge for generating wind. Proceedings of COBEM. 2013 ;[citado 2024 maio 16 ]
Vancouver
Sotto Mayor G, Moreira ABB, Cerón Muñoz HD. Influence of roughness in protective strips of leading edge for generating wind. Proceedings of COBEM. 2013 ;[citado 2024 maio 16 ]
Trabalho de evento
Assessment of non-linear aeroelastic behavior of an airfoil vibration in dynamic stall (2013)
Pereira, Daniel de Almeida; Vasconcellos, Rui Marcos Grombone de; Marques, Flávio Donizeti
Source: Proceedings of COBEM. Conference titles: International Congress of Mechanical Engineering - COBEM. Unidade: EESC
Subjects: AEROELASTICIDADE DE AERONAVES, ANÁLISE DE SÉRIES TEMPORAIS, VIBRAÇÕES
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PEREIRA, Daniel de Almeida e VASCONCELLOS, Rui Marcos Grombone de e MARQUES, Flávio Donizeti. Assessment of non-linear aeroelastic behavior of an airfoil vibration in dynamic stall. 2013, Anais.. Rio de Janeiro, RJ: ABCM, 2013. Disponível em: http://abcm.org.br/anais/cobem/2013/PDF/2020.pdf. Acesso em: 16 maio 2024.
APA
Pereira, D. de A., Vasconcellos, R. M. G. de, & Marques, F. D. (2013). Assessment of non-linear aeroelastic behavior of an airfoil vibration in dynamic stall. In Proceedings of COBEM. Rio de Janeiro, RJ: ABCM. Recuperado de http://abcm.org.br/anais/cobem/2013/PDF/2020.pdf
NLM
Pereira D de A, Vasconcellos RMG de, Marques FD. Assessment of non-linear aeroelastic behavior of an airfoil vibration in dynamic stall [Internet]. Proceedings of COBEM. 2013 ;[citado 2024 maio 16 ] Available from: http://abcm.org.br/anais/cobem/2013/PDF/2020.pdf
Vancouver
Pereira D de A, Vasconcellos RMG de, Marques FD. Assessment of non-linear aeroelastic behavior of an airfoil vibration in dynamic stall [Internet]. Proceedings of COBEM. 2013 ;[citado 2024 maio 16 ] Available from: http://abcm.org.br/anais/cobem/2013/PDF/2020.pdf
Trabalho de evento
Time series and spectral analysis of nonlinear aeroelastic oscillations (2013)
Vasconcellos, Rui Marcos Grombone de; Marques, Flávio Donizeti; Pereira, Daniel de Almeida
Source: Proceedings of COBEM. Conference titles: International Congress of Mechanical Engineering - COBEM. Unidade: EESC
Subjects: ANÁLISE ESPECTRAL, TÚNEIS DE VENTO, AEROELASTICIDADE DE AERONAVES
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
VASCONCELLOS, Rui Marcos Grombone de e MARQUES, Flávio Donizeti e PEREIRA, Daniel de Almeida. Time series and spectral analysis of nonlinear aeroelastic oscillations. 2013, Anais.. Rio de Janeiro, RJ: ABCM, 2013. Disponível em: http://abcm.org.br/anais/cobem/2013/_PDF/2059.pdf. Acesso em: 16 maio 2024.
APA
Vasconcellos, R. M. G. de, Marques, F. D., & Pereira, D. de A. (2013). Time series and spectral analysis of nonlinear aeroelastic oscillations. In Proceedings of COBEM. Rio de Janeiro, RJ: ABCM. Recuperado de http://abcm.org.br/anais/cobem/2013/_PDF/2059.pdf
NLM
Vasconcellos RMG de, Marques FD, Pereira D de A. Time series and spectral analysis of nonlinear aeroelastic oscillations [Internet]. Proceedings of COBEM. 2013 ;[citado 2024 maio 16 ] Available from: http://abcm.org.br/anais/cobem/2013/_PDF/2059.pdf
Vancouver
Vasconcellos RMG de, Marques FD, Pereira D de A. Time series and spectral analysis of nonlinear aeroelastic oscillations [Internet]. Proceedings of COBEM. 2013 ;[citado 2024 maio 16 ] Available from: http://abcm.org.br/anais/cobem/2013/_PDF/2059.pdf
Trabalho de evento
Theoretical and experimental analysis of the fuselage influence on the wing aerodynamic center position at low speed conditions (2013)
Constanzo, Fernão de Melo; Catalano, Fernando Martini
Source: Proceedings of COBEM. Conference titles: International Congress of Mechanical Engineering - COBEM. Unidade: EESC
Subjects: AERONAVES, AERODINÂMICA DE AERONAVES, FUSELAGEM DE AERONAVES, ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CONSTANZO, Fernão de Melo e CATALANO, Fernando Martini. Theoretical and experimental analysis of the fuselage influence on the wing aerodynamic center position at low speed conditions. 2013, Anais.. Rio de Janeiro, RJ: ABCM, 2013. Disponível em: https://repositorio.usp.br/directbitstream/cea4b79f-d23a-449c-bce7-1f7daa2eae1a/trabalho%2030%20-%20THEORETICAL%20AND%20EXPERIMENTAL%20ANALYSIS%20OF%20THE%20FUSELAGE%20INFLUENCE%20ON%20THE%20WING%20AERODYNAMIC%20CENTER%20POSITION%20AT%20LOW%20SPEED%20CONDITIONS%20%28COBEM%202013%29.pdf. Acesso em: 16 maio 2024.
APA
Constanzo, F. de M., & Catalano, F. M. (2013). Theoretical and experimental analysis of the fuselage influence on the wing aerodynamic center position at low speed conditions. In Proceedings of COBEM. Rio de Janeiro, RJ: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/cea4b79f-d23a-449c-bce7-1f7daa2eae1a/trabalho%2030%20-%20THEORETICAL%20AND%20EXPERIMENTAL%20ANALYSIS%20OF%20THE%20FUSELAGE%20INFLUENCE%20ON%20THE%20WING%20AERODYNAMIC%20CENTER%20POSITION%20AT%20LOW%20SPEED%20CONDITIONS%20%28COBEM%202013%29.pdf
NLM
Constanzo F de M, Catalano FM. Theoretical and experimental analysis of the fuselage influence on the wing aerodynamic center position at low speed conditions [Internet]. Proceedings of COBEM. 2013 ;[citado 2024 maio 16 ] Available from: https://repositorio.usp.br/directbitstream/cea4b79f-d23a-449c-bce7-1f7daa2eae1a/trabalho%2030%20-%20THEORETICAL%20AND%20EXPERIMENTAL%20ANALYSIS%20OF%20THE%20FUSELAGE%20INFLUENCE%20ON%20THE%20WING%20AERODYNAMIC%20CENTER%20POSITION%20AT%20LOW%20SPEED%20CONDITIONS%20%28COBEM%202013%29.pdf
Vancouver
Constanzo F de M, Catalano FM. Theoretical and experimental analysis of the fuselage influence on the wing aerodynamic center position at low speed conditions [Internet]. Proceedings of COBEM. 2013 ;[citado 2024 maio 16 ] Available from: https://repositorio.usp.br/directbitstream/cea4b79f-d23a-449c-bce7-1f7daa2eae1a/trabalho%2030%20-%20THEORETICAL%20AND%20EXPERIMENTAL%20ANALYSIS%20OF%20THE%20FUSELAGE%20INFLUENCE%20ON%20THE%20WING%20AERODYNAMIC%20CENTER%20POSITION%20AT%20LOW%20SPEED%20CONDITIONS%20%28COBEM%202013%29.pdf
Trabalho de evento
Aerodynamic study of wingtip devices on non-conventional configuration BWB (2013)
Diaz Izquierdo, David Orlando; Solarte Pineda, Jhonathan; Cerón Muñoz, Hernán Darío
Source: Proceedings of COBEM. Conference titles: International Congress of Mechanical Engineering - COBEM. Unidade: EESC
Subjects: ASAS DE AERONAVES, AERODINÂMICA DE AERONAVES, ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
DIAZ IZQUIERDO, David Orlando e SOLARTE PINEDA, Jhonathan e CERÓN MUÑOZ, Hernán Darío. Aerodynamic study of wingtip devices on non-conventional configuration BWB. 2013, Anais.. Rio de Janeiro, RJ: ABCM, 2013. . Acesso em: 16 maio 2024.
APA
Diaz Izquierdo, D. O., Solarte Pineda, J., & Cerón Muñoz, H. D. (2013). Aerodynamic study of wingtip devices on non-conventional configuration BWB. In Proceedings of COBEM. Rio de Janeiro, RJ: ABCM.
NLM
Diaz Izquierdo DO, Solarte Pineda J, Cerón Muñoz HD. Aerodynamic study of wingtip devices on non-conventional configuration BWB. Proceedings of COBEM. 2013 ;[citado 2024 maio 16 ]
Vancouver
Diaz Izquierdo DO, Solarte Pineda J, Cerón Muñoz HD. Aerodynamic study of wingtip devices on non-conventional configuration BWB. Proceedings of COBEM. 2013 ;[citado 2024 maio 16 ]
Trabalho de evento
Discontinuity induced bifurcation in aeroelastic systems with freeplay nonlinearity (2013)
Vasconcellos, Rui Marcos Grombone de; Abdelkefi, Abdessattar; Hajj, Muhammad R.; Marques, Flávio Donizeti
Source: Proceedings of COBEM. Conference titles: International Congress of Mechanical Engineering - COBEM. Unidade: EESC
Subjects: SISTEMAS NÃO LINEARES, AEROELASTICIDADE DE AERONAVES
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
VASCONCELLOS, Rui Marcos Grombone de et al. Discontinuity induced bifurcation in aeroelastic systems with freeplay nonlinearity. 2013, Anais.. Rio de Janeiro, RJ: ABCM, 2013. Disponível em: https://www.researchgate.net/profile/Abdessattar_Abdelkefi/publication/259559054_Discontinuity-induced_bifurcation_in_aeroelastic_systems_with_freeplay_nonlinearity/links/0a85e53a395f306262000000/Discontinuity-induced-bifurcation-in-aeroelastic-systems-with-freeplay-nonlinearity.pdf. Acesso em: 16 maio 2024.
APA
Vasconcellos, R. M. G. de, Abdelkefi, A., Hajj, M. R., & Marques, F. D. (2013). Discontinuity induced bifurcation in aeroelastic systems with freeplay nonlinearity. In Proceedings of COBEM. Rio de Janeiro, RJ: ABCM. Recuperado de https://www.researchgate.net/profile/Abdessattar_Abdelkefi/publication/259559054_Discontinuity-induced_bifurcation_in_aeroelastic_systems_with_freeplay_nonlinearity/links/0a85e53a395f306262000000/Discontinuity-induced-bifurcation-in-aeroelastic-systems-with-freeplay-nonlinearity.pdf
NLM
Vasconcellos RMG de, Abdelkefi A, Hajj MR, Marques FD. Discontinuity induced bifurcation in aeroelastic systems with freeplay nonlinearity [Internet]. Proceedings of COBEM. 2013 ;[citado 2024 maio 16 ] Available from: https://www.researchgate.net/profile/Abdessattar_Abdelkefi/publication/259559054_Discontinuity-induced_bifurcation_in_aeroelastic_systems_with_freeplay_nonlinearity/links/0a85e53a395f306262000000/Discontinuity-induced-bifurcation-in-aeroelastic-systems-with-freeplay-nonlinearity.pdf
Vancouver
Vasconcellos RMG de, Abdelkefi A, Hajj MR, Marques FD. Discontinuity induced bifurcation in aeroelastic systems with freeplay nonlinearity [Internet]. Proceedings of COBEM. 2013 ;[citado 2024 maio 16 ] Available from: https://www.researchgate.net/profile/Abdessattar_Abdelkefi/publication/259559054_Discontinuity-induced_bifurcation_in_aeroelastic_systems_with_freeplay_nonlinearity/links/0a85e53a395f306262000000/Discontinuity-induced-bifurcation-in-aeroelastic-systems-with-freeplay-nonlinearity.pdf
Trabalho de evento
Vibration-based damage identification applied for composite plate: experimental analysis (2013)
Medeiros, Ricardo de; Sartorato, Murilo; Marques, Flávio Donizeti; Tita, Volnei; Vandepitte, Dirk
Source: Proceedings of COBEM. Conference titles: International Congress of Mechanical Engineering - COBEM. Unidade: EESC
Subjects: DANO, AERONAVES, VIBRAÇÕES
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MEDEIROS, Ricardo de et al. Vibration-based damage identification applied for composite plate: experimental analysis. 2013, Anais.. Rio de Janeiro, RJ: ABCM, 2013. Disponível em: https://www.researchgate.net/profile/Volnei_Tita/publication/281973465_Vibration-based_damage_identification_applied_for_composite_plate_Experimental_analyses/links/5644cd7008ae54697fb81d6e/Vibration-based-damage-identification-applied-for-composite-plate-Experimental-analyses.pdf. Acesso em: 16 maio 2024.
APA
Medeiros, R. de, Sartorato, M., Marques, F. D., Tita, V., & Vandepitte, D. (2013). Vibration-based damage identification applied for composite plate: experimental analysis. In Proceedings of COBEM. Rio de Janeiro, RJ: ABCM. Recuperado de https://www.researchgate.net/profile/Volnei_Tita/publication/281973465_Vibration-based_damage_identification_applied_for_composite_plate_Experimental_analyses/links/5644cd7008ae54697fb81d6e/Vibration-based-damage-identification-applied-for-composite-plate-Experimental-analyses.pdf
NLM
Medeiros R de, Sartorato M, Marques FD, Tita V, Vandepitte D. Vibration-based damage identification applied for composite plate: experimental analysis [Internet]. Proceedings of COBEM. 2013 ;[citado 2024 maio 16 ] Available from: https://www.researchgate.net/profile/Volnei_Tita/publication/281973465_Vibration-based_damage_identification_applied_for_composite_plate_Experimental_analyses/links/5644cd7008ae54697fb81d6e/Vibration-based-damage-identification-applied-for-composite-plate-Experimental-analyses.pdf
Vancouver
Medeiros R de, Sartorato M, Marques FD, Tita V, Vandepitte D. Vibration-based damage identification applied for composite plate: experimental analysis [Internet]. Proceedings of COBEM. 2013 ;[citado 2024 maio 16 ] Available from: https://www.researchgate.net/profile/Volnei_Tita/publication/281973465_Vibration-based_damage_identification_applied_for_composite_plate_Experimental_analyses/links/5644cd7008ae54697fb81d6e/Vibration-based-damage-identification-applied-for-composite-plate-Experimental-analyses.pdf
Trabalho de evento
Viscoelastic-plastic constitutive models for biodegradable thermoplastics used to produce scaffolds (2013)
Vieira, André Ferreira Costa; Guedes, Rui M.; Tita, Volnei
Source: Proceedings of COBEM. Conference titles: International Congress of Mechanical Engineering - COBEM. Unidade: EESC
Subjects: ANDAIMES, VISCOELASTICIDADE DAS ESTRUTURAS, PLÁSTICOS BIODEGRADÁVEIS, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
VIEIRA, André Ferreira Costa e GUEDES, Rui M. e TITA, Volnei. Viscoelastic-plastic constitutive models for biodegradable thermoplastics used to produce scaffolds. 2013, Anais.. Rio de Janeiro, RJ: ABCM, 2013. Disponível em: http://www.abcm.org.br/anais/cobem/2013/_PDF/1474.pdf. Acesso em: 16 maio 2024.
APA
Vieira, A. F. C., Guedes, R. M., & Tita, V. (2013). Viscoelastic-plastic constitutive models for biodegradable thermoplastics used to produce scaffolds. In Proceedings of COBEM. Rio de Janeiro, RJ: ABCM. Recuperado de http://www.abcm.org.br/anais/cobem/2013/_PDF/1474.pdf
NLM
Vieira AFC, Guedes RM, Tita V. Viscoelastic-plastic constitutive models for biodegradable thermoplastics used to produce scaffolds [Internet]. Proceedings of COBEM. 2013 ;[citado 2024 maio 16 ] Available from: http://www.abcm.org.br/anais/cobem/2013/_PDF/1474.pdf
Vancouver
Vieira AFC, Guedes RM, Tita V. Viscoelastic-plastic constitutive models for biodegradable thermoplastics used to produce scaffolds [Internet]. Proceedings of COBEM. 2013 ;[citado 2024 maio 16 ] Available from: http://www.abcm.org.br/anais/cobem/2013/_PDF/1474.pdf
Trabalho de evento
Enhancement and prediction of flow boiling heat transfer inside horizontal tubes containing twisted-tape inserts (2013)
Mogaji, Taye Stephen; Ribatski, Gherhardt
Source: Proceedings of COBEM. Conference titles: International Congress of Mechanical Engineering - COBEM. Unidade: EESC
Subjects: TRANSFERÊNCIA DE CALOR, ESCOAMENTO, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MOGAJI, Taye Stephen e RIBATSKI, Gherhardt. Enhancement and prediction of flow boiling heat transfer inside horizontal tubes containing twisted-tape inserts. 2013, Anais.. Rio de Janeiro, RJ: ABCM, 2013. Disponível em: https://repositorio.usp.br/directbitstream/f1151d5e-2061-4846-9c33-a66720ea431a/PROD_25705_SYSNO_3125415.pdf. Acesso em: 16 maio 2024.
APA
Mogaji, T. S., & Ribatski, G. (2013). Enhancement and prediction of flow boiling heat transfer inside horizontal tubes containing twisted-tape inserts. In Proceedings of COBEM. Rio de Janeiro, RJ: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/f1151d5e-2061-4846-9c33-a66720ea431a/PROD_25705_SYSNO_3125415.pdf
NLM
Mogaji TS, Ribatski G. Enhancement and prediction of flow boiling heat transfer inside horizontal tubes containing twisted-tape inserts [Internet]. Proceedings of COBEM. 2013 ;[citado 2024 maio 16 ] Available from: https://repositorio.usp.br/directbitstream/f1151d5e-2061-4846-9c33-a66720ea431a/PROD_25705_SYSNO_3125415.pdf
Vancouver
Mogaji TS, Ribatski G. Enhancement and prediction of flow boiling heat transfer inside horizontal tubes containing twisted-tape inserts [Internet]. Proceedings of COBEM. 2013 ;[citado 2024 maio 16 ] Available from: https://repositorio.usp.br/directbitstream/f1151d5e-2061-4846-9c33-a66720ea431a/PROD_25705_SYSNO_3125415.pdf
Trabalho de evento
Microinjection evaluation of a diamond turned diffraction optical element (2013)
Granado, Renê Mendes; Jasinevicius, Renato Goulart; Cirino, Giuseppe Antonio
Source: Proceedings of COBEM. Conference titles: International Congress of Mechanical Engineering - COBEM. Unidade: EESC
Subjects: FERRAMENTAS, DIAMANTE, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GRANADO, Renê Mendes e JASINEVICIUS, Renato Goulart e CIRINO, Giuseppe Antonio. Microinjection evaluation of a diamond turned diffraction optical element. 2013, Anais.. Rio de Janeiro, RJ: ABCM, 2013. . Acesso em: 16 maio 2024.
APA
Granado, R. M., Jasinevicius, R. G., & Cirino, G. A. (2013). Microinjection evaluation of a diamond turned diffraction optical element. In Proceedings of COBEM. Rio de Janeiro, RJ: ABCM.
NLM
Granado RM, Jasinevicius RG, Cirino GA. Microinjection evaluation of a diamond turned diffraction optical element. Proceedings of COBEM. 2013 ;[citado 2024 maio 16 ]
Vancouver
Granado RM, Jasinevicius RG, Cirino GA. Microinjection evaluation of a diamond turned diffraction optical element. Proceedings of COBEM. 2013 ;[citado 2024 maio 16 ]
Trabalho de evento
Vibration-based damage identification applied for composite plate: numerical analysis (2013)
Sartorato, Murilo; Medeiros, Ricardo de; Marques, Flavio Donizeti ; Tita, Volnei ; Vandepitte, Dirk
Source: Proceedings of COBEM. Conference titles: International Congress of Mechanical Engineering - COBEM. Unidade: EESC
Subjects: INTEGRIDADE ESTRUTURAL, DANOS MECÂNICOS, VIBRAÇÕES DE AERONAVES, PIEZOELETRICIDADE, ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SARTORATO, Murilo et al. Vibration-based damage identification applied for composite plate: numerical analysis. 2013, Anais.. Rio de Janeiro, RJ: ABCM, 2013. . Acesso em: 16 maio 2024.
APA
Sartorato, M., Medeiros, R. de, Marques, F. D., Tita, V., & Vandepitte, D. (2013). Vibration-based damage identification applied for composite plate: numerical analysis. In Proceedings of COBEM. Rio de Janeiro, RJ: ABCM.
NLM
Sartorato M, Medeiros R de, Marques FD, Tita V, Vandepitte D. Vibration-based damage identification applied for composite plate: numerical analysis. Proceedings of COBEM. 2013 ;[citado 2024 maio 16 ]
Vancouver
Sartorato M, Medeiros R de, Marques FD, Tita V, Vandepitte D. Vibration-based damage identification applied for composite plate: numerical analysis. Proceedings of COBEM. 2013 ;[citado 2024 maio 16 ]
Trabalho de evento
A testbed for wireless networked control systems based on can and zigbee (2013)
Godoy, Eduardo Paciência; Oliveira, Thiago de Almeida; Diniz, Ivandro Severino; Porto, Arthur José Vieira
Source: Proceedings of COBEM. Conference titles: International Congress of Mechanical Engineering - COBEM. Unidade: EESC
Subjects: SENSOR, SISTEMAS DE CONTROLE, PROTOCOLOS DE COMUNICAÇÃO, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GODOY, Eduardo Paciência et al. A testbed for wireless networked control systems based on can and zigbee. 2013, Anais.. Rio de Janeiro, RJ: ABCM, 2013. Disponível em: http://abcm.org.br/anais/cobem/2013/PDF/2145.pdf. Acesso em: 16 maio 2024.
APA
Godoy, E. P., Oliveira, T. de A., Diniz, I. S., & Porto, A. J. V. (2013). A testbed for wireless networked control systems based on can and zigbee. In Proceedings of COBEM. Rio de Janeiro, RJ: ABCM. Recuperado de http://abcm.org.br/anais/cobem/2013/PDF/2145.pdf
NLM
Godoy EP, Oliveira T de A, Diniz IS, Porto AJV. A testbed for wireless networked control systems based on can and zigbee [Internet]. Proceedings of COBEM. 2013 ;[citado 2024 maio 16 ] Available from: http://abcm.org.br/anais/cobem/2013/PDF/2145.pdf
Vancouver
Godoy EP, Oliveira T de A, Diniz IS, Porto AJV. A testbed for wireless networked control systems based on can and zigbee [Internet]. Proceedings of COBEM. 2013 ;[citado 2024 maio 16 ] Available from: http://abcm.org.br/anais/cobem/2013/PDF/2145.pdf
Trabalho de evento
Computational method for calculation of the specific cutting energy (2013)
Rigatti, Aldo Marcel Yoshida; Assis, Cleiton Lazaro Fazolo de; Coelho, Reginaldo Teixeira; Jasinevicius, Renato Goulart; Rodrigues, Alessandro Roger
Source: Proceedings of COBEM. Conference titles: International Congress of Mechanical Engineering - COBEM. Unidade: EESC
Subjects: MOAGEM, FERRAMENTAS, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RIGATTI, Aldo Marcel Yoshida et al. Computational method for calculation of the specific cutting energy. 2013, Anais.. Rio de Janeiro, RJ: ABCM, 2013. Disponível em: http://www.abcm.org.br/anais/cobem/2013/PDF/576.pdf. Acesso em: 16 maio 2024.
APA
Rigatti, A. M. Y., Assis, C. L. F. de, Coelho, R. T., Jasinevicius, R. G., & Rodrigues, A. R. (2013). Computational method for calculation of the specific cutting energy. In Proceedings of COBEM. Rio de Janeiro, RJ: ABCM. Recuperado de http://www.abcm.org.br/anais/cobem/2013/PDF/576.pdf
NLM
Rigatti AMY, Assis CLF de, Coelho RT, Jasinevicius RG, Rodrigues AR. Computational method for calculation of the specific cutting energy [Internet]. Proceedings of COBEM. 2013 ;[citado 2024 maio 16 ] Available from: http://www.abcm.org.br/anais/cobem/2013/PDF/576.pdf
Vancouver
Rigatti AMY, Assis CLF de, Coelho RT, Jasinevicius RG, Rodrigues AR. Computational method for calculation of the specific cutting energy [Internet]. Proceedings of COBEM. 2013 ;[citado 2024 maio 16 ] Available from: http://www.abcm.org.br/anais/cobem/2013/PDF/576.pdf
Trabalho de evento
Open loop response identification during non-stationary operation of actively controlled rotating systems (2013)
Felscher, Patrick; Dornbusch, Felix; Markert, Richard; Nicoletti, Rodrigo
Source: Proceedings of COBEM. Conference titles: International Congress of Mechanical Engineering - COBEM. Unidade: EESC
Subjects: ROTOR, SISTEMAS DE CONTROLE, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
FELSCHER, Patrick et al. Open loop response identification during non-stationary operation of actively controlled rotating systems. 2013, Anais.. Rio de Janeiro, RJ: ABCM, 2013. Disponível em: https://repositorio.usp.br/directbitstream/b5d139ca-5f87-40dd-b973-84e601fa4a58/OK___trabalho%2020%20-%20Open%20Loop%20Response%20Identification%20During%20Non-Stationary%20Operation%20of%20Actively%20Controlled%20Rotating%20Systems%20%28COBEM%202013%29.pdf. Acesso em: 16 maio 2024.
APA
Felscher, P., Dornbusch, F., Markert, R., & Nicoletti, R. (2013). Open loop response identification during non-stationary operation of actively controlled rotating systems. In Proceedings of COBEM. Rio de Janeiro, RJ: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/b5d139ca-5f87-40dd-b973-84e601fa4a58/OK___trabalho%2020%20-%20Open%20Loop%20Response%20Identification%20During%20Non-Stationary%20Operation%20of%20Actively%20Controlled%20Rotating%20Systems%20%28COBEM%202013%29.pdf
NLM
Felscher P, Dornbusch F, Markert R, Nicoletti R. Open loop response identification during non-stationary operation of actively controlled rotating systems [Internet]. Proceedings of COBEM. 2013 ;[citado 2024 maio 16 ] Available from: https://repositorio.usp.br/directbitstream/b5d139ca-5f87-40dd-b973-84e601fa4a58/OK___trabalho%2020%20-%20Open%20Loop%20Response%20Identification%20During%20Non-Stationary%20Operation%20of%20Actively%20Controlled%20Rotating%20Systems%20%28COBEM%202013%29.pdf
Vancouver
Felscher P, Dornbusch F, Markert R, Nicoletti R. Open loop response identification during non-stationary operation of actively controlled rotating systems [Internet]. Proceedings of COBEM. 2013 ;[citado 2024 maio 16 ] Available from: https://repositorio.usp.br/directbitstream/b5d139ca-5f87-40dd-b973-84e601fa4a58/OK___trabalho%2020%20-%20Open%20Loop%20Response%20Identification%20During%20Non-Stationary%20Operation%20of%20Actively%20Controlled%20Rotating%20Systems%20%28COBEM%202013%29.pdf
Trabalho de evento
Model identification technique and PID controller for a stewart platform (2013)
Breganon, Ricardo; Souza, Mateus Moreira de; De Salvi, Fabio Toledo Bonemer; Belo, Eduardo Morgado; Lemes, Rodrigo Cristian
Source: Proceedings of COBEM. Conference titles: International Congress of Mechanical Engineering - COBEM. Unidade: EESC
Subjects: CONTROLADORES PROGRAMÁVEIS, MANIPULADORES, ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BREGANON, Ricardo et al. Model identification technique and PID controller for a stewart platform. 2013, Anais.. Rio de Janeiro, RJ: ABCM, 2013. Disponível em: https://repositorio.usp.br/directbitstream/2e795536-3f50-43f9-811f-2c0ccc8d6e60/trabalho%2010%20-%20MODEL%20IDENTIFICATION%20TECHNIQUE%20AND%20PID%20CONTROLLER%20FOR%20A%20STEWART%20PLATFORM%20%28COBEM%202013%29.pdf. Acesso em: 16 maio 2024.
APA
Breganon, R., Souza, M. M. de, De Salvi, F. T. B., Belo, E. M., & Lemes, R. C. (2013). Model identification technique and PID controller for a stewart platform. In Proceedings of COBEM. Rio de Janeiro, RJ: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/2e795536-3f50-43f9-811f-2c0ccc8d6e60/trabalho%2010%20-%20MODEL%20IDENTIFICATION%20TECHNIQUE%20AND%20PID%20CONTROLLER%20FOR%20A%20STEWART%20PLATFORM%20%28COBEM%202013%29.pdf
NLM
Breganon R, Souza MM de, De Salvi FTB, Belo EM, Lemes RC. Model identification technique and PID controller for a stewart platform [Internet]. Proceedings of COBEM. 2013 ;[citado 2024 maio 16 ] Available from: https://repositorio.usp.br/directbitstream/2e795536-3f50-43f9-811f-2c0ccc8d6e60/trabalho%2010%20-%20MODEL%20IDENTIFICATION%20TECHNIQUE%20AND%20PID%20CONTROLLER%20FOR%20A%20STEWART%20PLATFORM%20%28COBEM%202013%29.pdf
Vancouver
Breganon R, Souza MM de, De Salvi FTB, Belo EM, Lemes RC. Model identification technique and PID controller for a stewart platform [Internet]. Proceedings of COBEM. 2013 ;[citado 2024 maio 16 ] Available from: https://repositorio.usp.br/directbitstream/2e795536-3f50-43f9-811f-2c0ccc8d6e60/trabalho%2010%20-%20MODEL%20IDENTIFICATION%20TECHNIQUE%20AND%20PID%20CONTROLLER%20FOR%20A%20STEWART%20PLATFORM%20%28COBEM%202013%29.pdf

USP Schools

ReP

Filtros

Departament

Authors

USP affiliated authors

Date published

Subjects

Funding Agencies

Normalized affiliation

Non normalized affiliation

Countries of institutions of collaboration